2017 ktm/husky upper shock bearing?

wydopen
Profile picture for user wydopen
Posts
1300
Joined
8/17/2011
Location
805, CA US
wydopen
Edited Date/Time 5/9/2022 3:57pm
Anyone know the correct part # for husky/ktm upper shock bearing? Everywhere I look says part # is r12025 for
my 2017 FC350 but the the inside diameter for the bolt is larger. Also has a foam seal instead of rubber seal on the outer bushing. Thanks for the help
|
FGR01
Profile picture for user FGR01
Posts
5491
Joined
10/1/2006
Location
AZ US
Fantasy
676th
FGR01 5/5/2022 10:22am
5/5/2022 10:22am
Not sure on the 2017 (likely the same) but on the newer bikes the side collars ride inside the bearing between the bolt and the bearing. So, the bearing has a bigger ID than the OD of the bolt due to the collars also being in the calculation. Not sure if this is what you meant or if it helps.
wydopen
Profile picture for user wydopen
Posts
1300
Joined
8/17/2011
Location
805, CA US
wydopen 5/5/2022 3:21pm
5/5/2022 3:21pm
FGR01 wrote:
Not sure on the 2017 (likely the same) but on the newer bikes the side collars ride inside the bearing between the bolt and the bearing...
Not sure on the 2017 (likely the same) but on the newer bikes the side collars ride inside the bearing between the bolt and the bearing. So, the bearing has a bigger ID than the OD of the bolt due to the collars also being in the calculation. Not sure if this is what you meant or if it helps.
The bearing is the same..the ID of the collars where the bolt goes through is larger..the OD of the collars is the same so technically I can use the old collars in the new bearing but they should be replaced also..

The Shop

See All »
wydopen
Profile picture for user wydopen
Posts
1300
Joined
8/17/2011
Location
805, CA US
wydopen 5/6/2022 5:04am
5/6/2022 5:04am Edited Date/Time 5/6/2022 5:30am
Factor E wrote:
Post pic
ID of old bushing and bolt is 10mm
ID of new bushing is 12mm
OD Of both bushings is the same as well as ID of both bearings. Old bushings have rubber seal attached. New bushing has separate foam seal.
I was able to reuse the old bushings but they weren’t removed with the intention of reinstalling. They are runable for now but would rather replace them.

wydopen
Profile picture for user wydopen
Posts
1300
Joined
8/17/2011
Location
805, CA US
wydopen 5/6/2022 3:47pm
5/6/2022 3:47pm Edited Date/Time 5/6/2022 3:49pm
GoggleFiend904 wrote:
This is part r12012 [img]https://p.vitalmx.com/photos/forums/2022/05/06/548455/s1200_E51893EF_882B_47BB_BEA1_CFB002315FBF.jpg[/img]
This is part r12012
yea that's what I got but my kit included the bushings in the picture I posted and the ID of the bushings is 12mm while the old one is 10mm like my shock bolt
GoggleFiend904 5/6/2022 4:24pm
5/6/2022 4:24pm
GoggleFiend904 wrote:
This is part r12012 [img]https://p.vitalmx.com/photos/forums/2022/05/06/548455/s1200_E51893EF_882B_47BB_BEA1_CFB002315FBF.jpg[/img]
This is part r12012
wydopen wrote:
yea that's what I got but my kit included the bushings in the picture I posted and the ID of the bushings is 12mm while the...
yea that's what I got but my kit included the bushings in the picture I posted and the ID of the bushings is 12mm while the old one is 10mm like my shock bolt
That’s weird. Maybe someone replaced it before with an undated part number or possibly the shock could be from a newer model?

I have new 10mm parts if you need them
1
wydopen
Profile picture for user wydopen
Posts
1300
Joined
8/17/2011
Location
805, CA US
wydopen 5/9/2022 4:48am
5/9/2022 4:48am
GoggleFiend904 wrote:
This is part r12012 [img]https://p.vitalmx.com/photos/forums/2022/05/06/548455/s1200_E51893EF_882B_47BB_BEA1_CFB002315FBF.jpg[/img]
This is part r12012
wydopen wrote:
yea that's what I got but my kit included the bushings in the picture I posted and the ID of the bushings is 12mm while the...
yea that's what I got but my kit included the bushings in the picture I posted and the ID of the bushings is 12mm while the old one is 10mm like my shock bolt
GoggleFiend904 wrote:
That’s weird. Maybe someone replaced it before with an undated part number or possibly the shock could be from a newer model? I have new 10mm...
That’s weird. Maybe someone replaced it before with an undated part number or possibly the shock could be from a newer model?

I have new 10mm parts if you need them
Thank you. They were from Motosport and they were loose in a zip lock so maybe they just put the wrong bushings in.. I’ll take yours please. Can PayPal. Appreciate it.
GoggleFiend904 5/9/2022 4:59am
5/9/2022 4:59am
wydopen wrote:
yea that's what I got but my kit included the bushings in the picture I posted and the ID of the bushings is 12mm while the...
yea that's what I got but my kit included the bushings in the picture I posted and the ID of the bushings is 12mm while the old one is 10mm like my shock bolt
GoggleFiend904 wrote:
That’s weird. Maybe someone replaced it before with an undated part number or possibly the shock could be from a newer model? I have new 10mm...
That’s weird. Maybe someone replaced it before with an undated part number or possibly the shock could be from a newer model?

I have new 10mm parts if you need them
wydopen wrote:
Thank you. They were from Motosport and they were loose in a zip lock so maybe they just put the wrong bushings in.. I’ll take yours...
Thank you. They were from Motosport and they were loose in a zip lock so maybe they just put the wrong bushings in.. I’ll take yours please. Can PayPal. Appreciate it.
Cool. Just send $10 for postage to PayPal tierrabmx@gmail.com put your address in the message and I should be able to get them out after work today. I hope they work out for you
wydopen
Profile picture for user wydopen
Posts
1300
Joined
8/17/2011
Location
805, CA US
wydopen 5/9/2022 11:51am
5/9/2022 11:51am
GoggleFiend904 wrote:
That’s weird. Maybe someone replaced it before with an undated part number or possibly the shock could be from a newer model? I have new 10mm...
That’s weird. Maybe someone replaced it before with an undated part number or possibly the shock could be from a newer model?

I have new 10mm parts if you need them
wydopen wrote:
Thank you. They were from Motosport and they were loose in a zip lock so maybe they just put the wrong bushings in.. I’ll take yours...
Thank you. They were from Motosport and they were loose in a zip lock so maybe they just put the wrong bushings in.. I’ll take yours please. Can PayPal. Appreciate it.
GoggleFiend904 wrote:
Cool. Just send $10 for postage to PayPal tierrabmx@gmail.com put your address in the message and I should be able to get them out after work...
Cool. Just send $10 for postage to PayPal tierrabmx@gmail.com put your address in the message and I should be able to get them out after work today. I hope they work out for you
Thank you very much. Appreciate the help.
1
GoggleFiend904 5/9/2022 3:57pm
5/9/2022 3:57pm
wydopen wrote:
Thank you. They were from Motosport and they were loose in a zip lock so maybe they just put the wrong bushings in.. I’ll take yours...
Thank you. They were from Motosport and they were loose in a zip lock so maybe they just put the wrong bushings in.. I’ll take yours please. Can PayPal. Appreciate it.
GoggleFiend904 wrote:
Cool. Just send $10 for postage to PayPal tierrabmx@gmail.com put your address in the message and I should be able to get them out after work...
Cool. Just send $10 for postage to PayPal tierrabmx@gmail.com put your address in the message and I should be able to get them out after work today. I hope they work out for you
wydopen wrote:
Thank you very much. Appreciate the help.
I sent a message with tracking on PayPal. You’re welcome

Post a reply to: 2017 ktm/husky upper shock bearing?