All

r18b Added a reply to Jetting yz250 for more top end

7/6/2019 12:06am

That's true about the squish. Well the Yamaha dealer was saying the same thing about the yz. He knows i'm riding with a large squish on my cr. Well i tried it al from a 1.1 to .2 gasket. It all runs perfect with the right pipe but i prefer the .8 gasket. The standard gasket it runs like shit...

r18b Added a reply to Jetting yz250 for more top end

7/5/2019 11:14pm

What if you gonna raise the cylinder? I'm riding a cr250 with a .8 basegasket instead of the .2 A friend of mine who had a yz250 liked the cr better in all ways. The time that i did ride that yz it felt heavy and in my opion way to much bottom. So what if you gonna put the...

r18b Added a reply to Planning Belgium and Netherland Trip

7/4/2019 7:04am

https://achterhoek.nl/campings https://citycamps.com/en/motorhomes/ https://www.campingnavigator.com/en/campings-the-netherlands/north-brabant/ There will be more to find on google i guess. In August it's quit on the road. Holiday's. In that case you can be every where in a hour or a hour and half. That's a plus.

r18b Added a reply to Planning Belgium and Netherland Trip

7/2/2019 11:14am

Berghem, Heerde, Halle, Lichtenvoorde, Arnhem, Lommel, Grevenbroich , Munster.

Muscle-Milk-KTM Liked a reply to forum topic Southwick sand vs Red Bud sand?

6/30/2019 10:45am

Plus a lot of it stays on the bikes & ends up in the paddock or in the riders back yards. We used to wash our bikes in the same spot in the garden for the best part of 10 years, you can visibly see a slight mound there now, sounds crazy but true.

This forum topic has 14 replies.

r18b Added a reply to 2007 cr250

6/27/2019 10:02pm

Getting bolts from mettec or racetech is not intresting enough to get it. 75 dollar shipment and import taxes and the price of the bolts are the same as in Holland or the uk or France just not drilled. The quality of docwob, titanux or the france ones or the Holland ones are good. Ordered a guts seat foam. 79...

r18b Added a reply to 2007 cr250

6/24/2019 2:56pm

"Just need a few random size drilled headed hex flange bolts if you spot anything, I need, 1 xm10x137/140mm, 1.25 pitch. 3x m7x60. 4xm7x50." M7 is used in the cases.. only one who does have those m7 is docwob and docwob don't have drilled hex. You need to get the set of bolts for the cases. Thats the reason i...

r18b Added a reply to 2007 cr250

6/24/2019 1:35am

How is the bike running with the pipe? Thought that you did mention one time for a sealer for the airbox.. There is a guy on ebay that is selling them. Just ordered one and he was willing to lower the value otherwise i have to pay again those shit import duties. Thought would show it just in case you...

mxmasta Liked a forum topic Max Anstie helping Febvre in the middle of (edit) warm-up

6/24/2019 1:17am

Anyone seen something like that at a race at a professional level? Fair play Max Anstie - true sportsmanship at it's best. Edit: it wasn't in the moto, it was in the warm-up. But still - pretty nice from Max.

This forum topic has 14 replies.

r18b Added a reply to Best tuner in nederland, belgium or uk?

6/22/2019 12:39pm

Rille ( holland) the engine builder for lupino etc etc(van gebben). He knows his way with engines.

r18b Added a reply to Yamahas "problem" in MXGP

6/18/2019 9:09am

Bogers is a good rider for huttenmetalracing. The Honda and everything around it seems to much for him.

r18b Added a reply to CR250R Engine Rebuild Advice

6/17/2019 1:47am

Don't understand why people go the hot rod route or any other shit route while you can get the 05-07 oem crank. Same as for the piston. The oem piston or the prox piston is such a crap on a cr.