PNW riding this weekend. Horn Rapids anyone?

jeffro503
Profile picture for user jeffro503
Posts
27528
Joined
7/22/2007
Location
St Helens, OR US
jeffro503
Edited Date/Time 11/14/2018 7:23pm
I'm finally going to make the trip up to Horn Rapids this weekend. Never been there before. Heading up Friday evening and be riding all day Saturday and probably half of Sunday. If you see a Husky 125 with a #503 or a guy on a new Husky 250 with no numbers ( might be wearing a jersey? ) .....say hello! Hope to meet up with some of you guys.

Gotta finish the break in on the new 250 and try to get familiar with it.

Let's roost!
3
|
RickyRoss519
Profile picture for user RickyRoss519
Posts
147
Joined
4/21/2017
Location
Marysville, WA US
Fantasy
2100th
RickyRoss519 11/14/2018 11:54am
11/14/2018 11:54am
Have a killer time man. Horn is killer. From the main track to the sand track! Be safe brotha!
1
SmokinJoe439 11/14/2018 11:57am
11/14/2018 11:57am
Horn isn't bad they groom it regularly now you should have hit washougal last weekend track was actually really good. The one thing I don't like about horn is some days the wind is bad which makes jumping sketchy.
1
pummel
Profile picture for user pummel
Posts
843
Joined
6/2/2010
Location
Salem, OR US
Fantasy
1967th
pummel 11/14/2018 12:02pm
11/14/2018 12:02pm
Eugene?? Good to see you Sunday Jeff---
jeffro503
Profile picture for user jeffro503
Posts
27528
Joined
7/22/2007
Location
St Helens, OR US
jeffro503 11/14/2018 12:15pm
11/14/2018 12:15pm
Plan on riding my brains out both days. Not sure when I'll be able to make it back up that way again.

And Joe....I wish I would have gone to Washougal too. Albany was not that good. But with some bike issues I had....I was lucky I was at Albany. Would of been easier to get the bike back to the pit.

And Ben.....you too brother. Always nice to go cut laps with you.

The Shop

See All »
mattyhamz2
Profile picture for user mattyhamz2
Posts
11159
Joined
7/6/2015
Location
So Cal, CA US
mattyhamz2 11/14/2018 12:17pm
11/14/2018 12:17pm
jeffro503 wrote:
Plan on riding my brains out both days. Not sure when I'll be able to make it back up that way again. And Joe....I wish I...
Plan on riding my brains out both days. Not sure when I'll be able to make it back up that way again.

And Joe....I wish I would have gone to Washougal too. Albany was not that good. But with some bike issues I had....I was lucky I was at Albany. Would of been easier to get the bike back to the pit.

And Ben.....you too brother. Always nice to go cut laps with you.
You taking out the 250?
Spudnut
Profile picture for user Spudnut
Posts
1946
Joined
6/25/2018
Location
WA US
Spudnut 11/14/2018 12:23pm
11/14/2018 12:23pm Edited Date/Time 11/14/2018 12:26pm
Shit nice I’ll be there saturday on my YZ250 Should be about 45 and sunny! The layout right now is pretty fun and the dirt is super nice also. I’ll deff come say hey if I see you out there!
jeffro503
Profile picture for user jeffro503
Posts
27528
Joined
7/22/2007
Location
St Helens, OR US
jeffro503 11/14/2018 12:24pm
11/14/2018 12:24pm
Spudnut wrote:
Shit nice I’ll be there saturday on my YZ250 Should be about 45 and sunny! The layout right now is pretty fun and the dirt is...
Shit nice I’ll be there saturday on my YZ250 Should be about 45 and sunny! The layout right now is pretty fun and the dirt is super nice also. I’ll deff come say hey if I see you out there!
Right on Spud! Hope to see you there.
1
jeffro503
Profile picture for user jeffro503
Posts
27528
Joined
7/22/2007
Location
St Helens, OR US
jeffro503 11/14/2018 12:27pm
11/14/2018 12:27pm
jeffro503 wrote:
Plan on riding my brains out both days. Not sure when I'll be able to make it back up that way again. And Joe....I wish I...
Plan on riding my brains out both days. Not sure when I'll be able to make it back up that way again.

And Joe....I wish I would have gone to Washougal too. Albany was not that good. But with some bike issues I had....I was lucky I was at Albany. Would of been easier to get the bike back to the pit.

And Ben.....you too brother. Always nice to go cut laps with you.
mattyhamz2 wrote:
You taking out the 250?
Haha yep! Got in like 4 little 2 - 3 lap rides in and the rear wheel was locking up. Has a faulty rear brake master cylinder. Brakes work , but wouldn't realease pressure enough so the pads would drag. They would heat up and start to lock the rear wheel. I have the shop replacing it tomorrow. So it should be good to go. I hope.
1
mattyhamz2
Profile picture for user mattyhamz2
Posts
11159
Joined
7/6/2015
Location
So Cal, CA US
mattyhamz2 11/14/2018 12:32pm
11/14/2018 12:32pm
jeffro503 wrote:
Plan on riding my brains out both days. Not sure when I'll be able to make it back up that way again. And Joe....I wish I...
Plan on riding my brains out both days. Not sure when I'll be able to make it back up that way again.

And Joe....I wish I would have gone to Washougal too. Albany was not that good. But with some bike issues I had....I was lucky I was at Albany. Would of been easier to get the bike back to the pit.

And Ben.....you too brother. Always nice to go cut laps with you.
mattyhamz2 wrote:
You taking out the 250?
jeffro503 wrote:
Haha yep! Got in like 4 little 2 - 3 lap rides in and the rear wheel was locking up. Has a faulty rear brake master...
Haha yep! Got in like 4 little 2 - 3 lap rides in and the rear wheel was locking up. Has a faulty rear brake master cylinder. Brakes work , but wouldn't realease pressure enough so the pads would drag. They would heat up and start to lock the rear wheel. I have the shop replacing it tomorrow. So it should be good to go. I hope.
That's a bummer!!! Have fun this weekend on it and get some videos!
jeffro503
Profile picture for user jeffro503
Posts
27528
Joined
7/22/2007
Location
St Helens, OR US
jeffro503 11/14/2018 12:37pm
11/14/2018 12:37pm
mattyhamz2 wrote:
You taking out the 250?
jeffro503 wrote:
Haha yep! Got in like 4 little 2 - 3 lap rides in and the rear wheel was locking up. Has a faulty rear brake master...
Haha yep! Got in like 4 little 2 - 3 lap rides in and the rear wheel was locking up. Has a faulty rear brake master cylinder. Brakes work , but wouldn't realease pressure enough so the pads would drag. They would heat up and start to lock the rear wheel. I have the shop replacing it tomorrow. So it should be good to go. I hope.
mattyhamz2 wrote:
That's a bummer!!! Have fun this weekend on it and get some videos!
That's a bummer!!! Have fun this weekend on it and get some videos!
I was a little bummed but the track kinda sucked ...so no biggie. This weekend should be prime and hopefully no bike issues. Should be epic! So Freakin' weird owning this 250. I sit on it and it feels just like my 125.....just with a shit ton more power haha. Especially on the bottom. I'll end up loving it!
1
mattyhamz2
Profile picture for user mattyhamz2
Posts
11159
Joined
7/6/2015
Location
So Cal, CA US
mattyhamz2 11/14/2018 12:43pm
11/14/2018 12:43pm
jeffro503 wrote:
Haha yep! Got in like 4 little 2 - 3 lap rides in and the rear wheel was locking up. Has a faulty rear brake master...
Haha yep! Got in like 4 little 2 - 3 lap rides in and the rear wheel was locking up. Has a faulty rear brake master cylinder. Brakes work , but wouldn't realease pressure enough so the pads would drag. They would heat up and start to lock the rear wheel. I have the shop replacing it tomorrow. So it should be good to go. I hope.
mattyhamz2 wrote:
That's a bummer!!! Have fun this weekend on it and get some videos!
That's a bummer!!! Have fun this weekend on it and get some videos!
jeffro503 wrote:
I was a little bummed but the track kinda sucked ...so no biggie. This weekend should be prime and hopefully no bike issues. Should be epic...
I was a little bummed but the track kinda sucked ...so no biggie. This weekend should be prime and hopefully no bike issues. Should be epic! So Freakin' weird owning this 250. I sit on it and it feels just like my 125.....just with a shit ton more power haha. Especially on the bottom. I'll end up loving it!
Haha that's awesome Jeffro! A 16-18 TC250 is the next bike on my list after a new 450. Gotta get a YZ125 in there somewhere too. But those 16-18 Husky's are just so simple and so good to look at!
Spudnut
Profile picture for user Spudnut
Posts
1946
Joined
6/25/2018
Location
WA US
Spudnut 11/14/2018 12:54pm
11/14/2018 12:54pm
jeffro503 wrote:
Right on Spud! Hope to see you there.
See you Saturday! I’ll be the guy on the hill with the red truck and white trailer
Tracktor
Profile picture for user Tracktor
Posts
2344
Joined
8/17/2006
Location
The RTF/Amboy, WA US
Tracktor 11/14/2018 1:57pm
11/14/2018 1:57pm
jeffro503 wrote:
Plan on riding my brains out both days. Not sure when I'll be able to make it back up that way again. And Joe....I wish I...
Plan on riding my brains out both days. Not sure when I'll be able to make it back up that way again.

And Joe....I wish I would have gone to Washougal too. Albany was not that good. But with some bike issues I had....I was lucky I was at Albany. Would of been easier to get the bike back to the pit.

And Ben.....you too brother. Always nice to go cut laps with you.
mattyhamz2 wrote:
You taking out the 250?
jeffro503 wrote:
Haha yep! Got in like 4 little 2 - 3 lap rides in and the rear wheel was locking up. Has a faulty rear brake master...
Haha yep! Got in like 4 little 2 - 3 lap rides in and the rear wheel was locking up. Has a faulty rear brake master cylinder. Brakes work , but wouldn't realease pressure enough so the pads would drag. They would heat up and start to lock the rear wheel. I have the shop replacing it tomorrow. So it should be good to go. I hope.
Check your pedal adjustment. Pretty common on Husky/KTM to not have enough freeplay to release pads.

We hit Horn two weeks ago and main track was stellar. Lips stayed good all day and layout flowed well. Area 51 was a bit dry but always a blast to change things up. We would be headed over if wasn't dry enough to ride at home or locally this weekend. Washougal & home track was perfect last weekend and looks to be good this weekend as well. Pretty uncommon for a November in NW.
We roll in a black Ford Excursion with black enclosed trailer - 228 & 428 on KX250F's & 210 on Husky 85's if you are ever see us..............
CarlinoJoeVideo
Profile picture for user CarlinoJoeVideo
Posts
7422
Joined
11/30/2013
Location
Portland/Los Angeles, CA US
CarlinoJoeVideo 11/14/2018 2:26pm
11/14/2018 2:26pm
That place is fun. Reminds me of So Cal tracks. Keep an eye on the forecast for any wind. It can get crazy there! Have fun!
Coach529
Profile picture for user Coach529
Posts
353
Joined
4/1/2008
Location
ID US
Coach529 11/14/2018 3:09pm
11/14/2018 3:09pm
Love Horn......but cannot make it this time.


ob
Profile picture for user ob
Posts
1619
Joined
3/14/2010
Location
Carlsbad, CA US
ob 11/14/2018 3:22pm
11/14/2018 3:22pm
Wow I don’t miss that drive. Can’t believe you haven’t ever been out there Jeffro!
MX915
Profile picture for user MX915
Posts
469
Joined
1/17/2018
Location
Central, NJ US
MX915 11/14/2018 3:52pm
11/14/2018 3:52pm
FWIW some brembos having issues out of the factory is nothing new. My 03 450 SX had the same problem on the front brake first ride. Dealer took a new assembly off a bike on the showroom floor and never had another issue.

Hopefully you got all the bugs out of it now. Cool
mxer613
Profile picture for user mxer613
Posts
488
Joined
11/22/2011
Location
Forest Grove, OR US
mxer613 11/14/2018 5:46pm
11/14/2018 5:46pm
jeffro503 wrote:
Plan on riding my brains out both days. Not sure when I'll be able to make it back up that way again. And Joe....I wish I...
Plan on riding my brains out both days. Not sure when I'll be able to make it back up that way again.

And Joe....I wish I would have gone to Washougal too. Albany was not that good. But with some bike issues I had....I was lucky I was at Albany. Would of been easier to get the bike back to the pit.

And Ben.....you too brother. Always nice to go cut laps with you.
I was at Albany last Sunday, I didn’t see you, I was riding my rebuilt 96 yz250
2

Pit Row

See All »
omalley
Profile picture for user omalley
Posts
1528
Joined
7/27/2016
Location
Snohomish, WA US
omalley 11/14/2018 6:04pm
11/14/2018 6:04pm
Damn! Can’t make it. Love that place!


jeffro503
Profile picture for user jeffro503
Posts
27528
Joined
7/22/2007
Location
St Helens, OR US
jeffro503 11/14/2018 7:09pm
11/14/2018 7:09pm
jeffro503 wrote:
Plan on riding my brains out both days. Not sure when I'll be able to make it back up that way again. And Joe....I wish I...
Plan on riding my brains out both days. Not sure when I'll be able to make it back up that way again.

And Joe....I wish I would have gone to Washougal too. Albany was not that good. But with some bike issues I had....I was lucky I was at Albany. Would of been easier to get the bike back to the pit.

And Ben.....you too brother. Always nice to go cut laps with you.
mxer613 wrote:
I was at Albany last Sunday, I didn’t see you, I was riding my rebuilt 96 yz250 [img]https://p.vitalmx.com/photos/forums/2018/11/14/302513/s1200_E03DDA6D_FF05_42AA_962E_6EE34F0E9478.jpg[/img]
I was at Albany last Sunday, I didn’t see you, I was riding my rebuilt 96 yz250
Shit Jason , I didn't see you either. I didn't know you had a YZ either?? What year is that?
jeffro503
Profile picture for user jeffro503
Posts
27528
Joined
7/22/2007
Location
St Helens, OR US
jeffro503 11/14/2018 7:12pm
11/14/2018 7:12pm
MX915 wrote:
FWIW some brembos having issues out of the factory is nothing new. My 03 450 SX had the same problem on the front brake first ride...
FWIW some brembos having issues out of the factory is nothing new. My 03 450 SX had the same problem on the front brake first ride. Dealer took a new assembly off a bike on the showroom floor and never had another issue.

Hopefully you got all the bugs out of it now. Cool
That's what the shop said as well. The service guy said he has to replace a few of them. It's not super common , but not rare either. He said that the casting doesn't get cleaned out all the way and blocks the relief port. Even if it's only 90% blocked , once that pad rubs , heats things up and will just slowly close that caliper like a vise. Which is exactly what mine was doing.
mxer613
Profile picture for user mxer613
Posts
488
Joined
11/22/2011
Location
Forest Grove, OR US
mxer613 11/14/2018 7:23pm
11/14/2018 7:23pm
jeffro503 wrote:
Plan on riding my brains out both days. Not sure when I'll be able to make it back up that way again. And Joe....I wish I...
Plan on riding my brains out both days. Not sure when I'll be able to make it back up that way again.

And Joe....I wish I would have gone to Washougal too. Albany was not that good. But with some bike issues I had....I was lucky I was at Albany. Would of been easier to get the bike back to the pit.

And Ben.....you too brother. Always nice to go cut laps with you.
mxer613 wrote:
I was at Albany last Sunday, I didn’t see you, I was riding my rebuilt 96 yz250 [img]https://p.vitalmx.com/photos/forums/2018/11/14/302513/s1200_E03DDA6D_FF05_42AA_962E_6EE34F0E9478.jpg[/img]
I was at Albany last Sunday, I didn’t see you, I was riding my rebuilt 96 yz250
jeffro503 wrote:
Shit Jason , I didn't see you either. I didn't know you had a YZ either?? What year is that?
It’s a one owner 96 with less than 20 hours of logging road time on it. Got from my boss, original title.
jeffro503
Profile picture for user jeffro503
Posts
27528
Joined
7/22/2007
Location
St Helens, OR US
jeffro503 11/14/2018 7:33pm
11/14/2018 7:33pm
mxer613 wrote:
It’s a one owner 96 with less than 20 hours of logging road time on it. Got from my boss, original title. [img]https://p.vitalmx.com/photos/forums/2018/11/14/302540/s1200_B379169C_4102_440F_A529_463EC82D665E.jpg[/img]
It’s a one owner 96 with less than 20 hours of logging road time on it. Got from my boss, original title.
Well shit , you can't beat that! I didn't know you were playing around with the 2 stroke thing. Welcome aboard man! haha.
WheelieNelson 11/16/2018 12:53pm
11/16/2018 12:53pm
jeffro503 wrote:
Haha yep! Got in like 4 little 2 - 3 lap rides in and the rear wheel was locking up. Has a faulty rear brake master...
Haha yep! Got in like 4 little 2 - 3 lap rides in and the rear wheel was locking up. Has a faulty rear brake master cylinder. Brakes work , but wouldn't realease pressure enough so the pads would drag. They would heat up and start to lock the rear wheel. I have the shop replacing it tomorrow. So it should be good to go. I hope.
mattyhamz2 wrote:
That's a bummer!!! Have fun this weekend on it and get some videos!
That's a bummer!!! Have fun this weekend on it and get some videos!
jeffro503 wrote:
I was a little bummed but the track kinda sucked ...so no biggie. This weekend should be prime and hopefully no bike issues. Should be epic...
I was a little bummed but the track kinda sucked ...so no biggie. This weekend should be prime and hopefully no bike issues. Should be epic! So Freakin' weird owning this 250. I sit on it and it feels just like my 125.....just with a shit ton more power haha. Especially on the bottom. I'll end up loving it!
I saw some pictures and the dirt looked like concrete, that place isn't what it used to be
pummel
Profile picture for user pummel
Posts
843
Joined
6/2/2010
Location
Salem, OR US
Fantasy
1967th
pummel 11/16/2018 1:51pm
11/16/2018 1:51pm
Ya Albany last Sunday honestly wasn't very good. They said that they had already winterized the water system.
The track was either hard and dusty or muddy. Not much else. Wasn't my favorite layout either... They do a great job down there and don't get enough credit for a tough job.

Post a reply to: PNW riding this weekend. Horn Rapids anyone?