Brake piston help needed

shuggs
Profile picture for user shuggs
Posts
1625
Joined
8/6/2008
Location
Dunfermline GB
shuggs
Edited Date/Time 9/7/2021 11:55am
Attached pic is from 2105 ktm85, struggling to get any pressure built up, I take caused by the 2 pistons that are near flush.

Have been using a mityvac pump to bleed and fluid is clear but still no working brake.

Seriously stuck on what to try next.


|
Rickyisms
Profile picture for user Rickyisms
Posts
4799
Joined
10/5/2017
Location
FL US
Rickyisms 9/7/2021 8:15am
9/7/2021 8:15am
Try reverse bleeding with a syringe? Once I did it once, I never bled any brake system the regular way again.
1
charlie68
Profile picture for user charlie68
Posts
154
Joined
6/28/2019
Location
North Windham, CT US
charlie68 9/7/2021 9:44am
9/7/2021 9:44am
Have you bled it at the master cylinder ( either by the bleed screw or banjo bolt )?
shuggs
Profile picture for user shuggs
Posts
1625
Joined
8/6/2008
Location
Dunfermline GB
shuggs 9/7/2021 11:55am
9/7/2021 11:55am
The issue is not how to get fluid bled through but more the route that it take which seems to cause the problem with pistons working freely
doitinthewoods 9/7/2021 3:27pm
9/7/2021 3:27pm
Bleed it and crack it where the brake line meets the master, then do it where the line meets the caliper, and then do the caliper
1

Post a reply to: Brake piston help needed